Therapeutic Wheelchair Cushion:

• Exceptional performance & comfort
• Double density foam construction
• W 43cm. L 45.7cm – Fits most wheelchairs
• 8.5cm deep for added comfort
• Black Dartex zipped cover – anti microbial / bacterial
• Hand and machine washable

All MouleTec cushions:

• Geometric anatomically shaped seat designs
• Help distribute occupant weight evenly
• Help reduce pressure build-up when seated
• Aid improvements in venous blood flow
• Help reduce risk of blood pooling in lower limbs
• Promote improved seating posture
• Help alleviate circulation problems

The Sit, Slide & Stand Pad will allow a patient to sit down at the front of a chair, and then slide their hips back into the chair. It will only slide backwards, so the patient will not slide forward again.

If the patient cannot slide themselves back into the chair, they can be helped to slide back by one or two nurses pulling the pad back with the blue webbing handles. The patient can be helped to stand by the nurses pulling the handles.

Once they are correctly positioned in the chair, the patient should maintain good spinal posture and can lean back against the chair, but they should not slide off it. This product will be good for the type of patient who normally gently slides off the chair, as this can be used instead of a Safety Belt. It is best if patients wear trousers as some dress fabrics could ride up.

The Wheelchair Boot Slider is designed to make is easier for people to slide a wheelchair into the boot (or trunk) of a car. People often have difficulty getting a wheelchair into the boot of a car, and usually resort to having to lift the wheelchair.

There are expensive alternatives such as hoists and ramps, but ours is a simple, low tech. affordable product. It is important to remember that this item does not make the wheelchair weigh any less and it will not work all on it's own... it still requires an initial effort to get the weight of the wheelchair onto the lip of the car boot.

The carer leans the Boot Slider on the back of the car, so they only lift part of the weight for a about a second or two until the bottom of the Wheelchair Boot Slider 'frame' is resting on their thighs. Then most of the weight is resting on the top of the car boot opening. Once it is there, it is a case of walking forward a step and sliding the wheelchair into the boot.

Getting it out of the boot is even easier as the Wheelchair Boot Slider rests on the the lip of the boot, and the slider guides it to the ground, controlling it all the way.

No modifications are needed to the car and the Wheelchair Boot Slider is very helpful in a community setting where different volunteers use their own cars to drive people with wheelchairs. Also when different relatives are taking people around they can use their own car. We sell many of these items to Community Health Centers and the public.

The L.I.T.E Bag has been designed to contain & stabilise the load, whilst ensuring that an easy grip is achieved, by means of strategically placed handles. It enables the wheelchair to be safety stored, in one piece.

The revolutionary design, with ergonomically "friendly" handles effectively reduces the load & bulk of the wheelchair and by doing so increases the comfort of the individual/s lifting the bag, in & out of the car boot.

Jean Bish & Sue Barton who are experienced chartered physiotherapists, teachers & product innovators identified the risks of injury to wheelchair handlers and initiated a research programme, which ultimately resulted in the design of the L.I.T.E Bag.

It reduces over-reaching and enables the individual to maintain good body posture, by eliminating twisting and by keeping the load close to the body. The bag is extremely easy to clean.

The product is manufactured, in the UK by Stylex of Scunthorpe.